Our Rectangular horizontal autoclaves are widely used in various bulk laboratories for their day to day studies on scale sterilization procedures where they give dryness of the sterilized medium a paramount importance and for that our sterilized media is prone to various micro-bacterial and viral infections. Having a specialization in customers’ requirements we have an expert team of making both standard and customized models.
Robust and rugged all weld construction which is leak proof unlike riveted construction. Inner chamber is made of thick plate of Mild Steel of non magnetic stainless steel of 304/316 quality and jacket is made out of rolled steel.
Sterilizers will have single door made out of rolled steel lined with S.S. sheet on both sides. All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure.
The steam jacket is lined on the outer side with asbestos sheet or glass wool which prevent heat losses due to radiation and is covered by strong rolled steel sheet .
Made of thick stainless steel plate suitably located under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacement/repair. Fitted with water gauge glass for water level, safety valve, water inlet and drain valves. It is also provided with Low Water Level cut off device. This device protects the heater in the generator from burning out dry. The steam pressure in the boiler is indicated on a individual pressure gauge.
Every horizontal sterilizer is fitted with SELF LOCKING SAFETY DOOR which cannot be opened when the chamber is under pressure. The clutch mechanism automatically disengages the threads of the Pressure locking system for precluding any eventuality of accident when the chamber is under pressure. A heat resistant Neoprene Rubber gasket ensure steam tight fitting.
Electrically operated “PIEZOSTAT” (Pressure Control Device) is incorporated in all electrically operated sterilizers. It economizes power consumption and limits the use of release valve which would frequently blow steam into the room. It cuts off the power supply to heaters when the set pressure is achieved and re-energies heaters when pressure falls down
Complete sterilizing cycle is controlled from one point with the help of “Multi port valve” fitted at front top. Two speeds of exhaust are available for evacuating.
Two separate valves provided for evacuating air and steam from inner chamber and jacket as and when desired. A steam trap(Moisture trap) is fitted in the chamber discharge line to eliminate the condensate automatically.
Houses the Pressure control switch, digital temperature indicator, Main switch, Pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation.
Operating Temperature and pressure :–
|Model||Inner dimension (inch)||Capacity (Litres)||Heater load|
|APS –SSHR – 200||18” x 18” x 36”||200||12 kW|
|APS – SSHR - 250||18” x 18” x 48”||250||12 kW|
|APS– SSHR – 350||24” x 24” x 36”||350||15 kW|
|APS– SSHR – 450||24” x 24” x 48”||450||18 kW|
|APS– SSHR – 550||24” x 24” x 60”||550||22 kW|
|APS– SSHR – 650||24” x 24” x 72”||650||30 kW|
|APS– SSHR – 800||30” x 30” x 60”||800||36 kW|
|Sterilization temp & pressure||Operating pressure|
|1.2 Kg/cm2 (15-18psi) at 121°C||From 10 psi to 22 psi|
Note: Customized Solution Available On Request
© 2018 Cssd Equipments. All rights reserved | Design by Designtoonz